APPLICATION
AUSTRALIAN TANNER ATN20”
COLRAIN TQ20”
DANA / SPICER / HENDRICKSON D22 TAPER SPINDLE & K22 15” & 20” FREIGHTER EATON JE07-L & JE501-L 20“
FREIGHTER – INGERSOLL A22H, F22H 15” & 20”
HAULMARK – DANA D22
HOLLAND TAPER SPINDLE 20”
KIC SUDISA TN20”
KRUEGER – DANA D22
MOSS METRIC AND LOW LOADER
ROCKWELL / MERITOR TN20”
ROCKWELL / MERITOR ARN, ATN, RN, TQ 15” & 20”
ROR TN 15” & 20” / ROR TM 20”
TRAIL QUIP ATN 15” & 20”
YORK 782, 784, 20” & 783 15” / YORK 160 20” / YORK 160 LOW LOADER
DIMENSIONS
d – Bore : 89.974 mm
D – Cup Outer Diameter : 146.975 mm
B – Cone Width : 40.000 mm
C – Cup Width : 32.499 mm
T – Bearing Width : 40.000 mm
ABUTMENT AND FILLET DIMENSIONS
R – Cone Backface “To Clear” Radius1 : 7.110 mm
r – Cup Backface “To Clear” Radius2 : 3.56 mm
da – Cone Frontface Backing Diameter : 99.06 mm
db – Cone Backface Backing Diameter : 112.01 mm
Da – Cup Frontface Backing Diameter : 141.00 mm
Db – Cup Backface Backing Diameter : 133.10 mm
Ab – Cage-Cone Frontface Clearance : 3.6 mm
Aa – Cage-Cone Backface Clearance : 1 mm
a – Effective Center Location3 : -8.6 mm
BASIC LOAD RATINGS
C90 – Dynamic Radial Rating (90 million revolutions)4 : 84200 N
C1 – Dynamic Radial Rating (1 million revolutions)5 : 325000 N
C0 – Static Radial Rating : 388000 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)6 : 47900 N
FACTORS
K – Factor7 : 1.76
e – ISO Factor8 : 0.33
Y – ISO Factor9 : 1.8
G1 – Heat Generation Factor (Roller-Raceway) : 168
G2 – Heat Generation Factor (Rib-Roller End) : 34.7
Cg – Geometry Factor : 0.0921
HM218248 / HM218210
Timken Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0610KM
DIMENSIONS
d – Bore : 89.974 mm
D – Cup Outer Diameter : 146.975 mm
B – Cone Width : 40.000 mm
C – Cup Width : 32.499 mm
T – Bearing Width : 40.000 mm
$83.60
Available on back-order
